½
Lower the Bypass tray,
located on the right side of
the product.
½
Unfold the paper support
extension as shown
½
Prepare a stack of paper or
envelope for loading by
flexing or fanning them back
and forth. Straighten the
edges on a level surface.
½
Load the print material with
the print side facing down and
against the right edge of the
tray.
Xerox WorkCentre Pro 412 User Guide
Loading the Bypass Tray
HINT: For transparencies hold the transparencies by the
edges and avoid touching the print side. Oils from your fingers
that are deposited on the transparency can cause print quality
problems.
Paper
Support
Bypass
Tray
Page 7-21