Table of Contents
Advertisement
That the mains voltage at
■
your outlet corresponds to
the rated voltage stated on
the
device (type plate). The
connected loads and the
required fuse value are
stated on the
identification plate.
The appliance must not be
■
powered by an external
switching device, such as a
timer, or connected to a
circuit that is regularly
switched on and off by a
utility company.
That the mains plug and the
■
earthing socket correspond
to each other and that the
earth connection is correctly
installed.
That the electrical installation
■
has wires of sufficiently large
diameter.
That the mains plug is freely
■
accessible at all times. If it is
not possible to comply with
the relevant regulations, a
switch (2-pole
off switch) become
built into the permanent
installation, in accordance
with the regulations for
electrical systems.
Safety instructions
When using an earth leakage
■
circuit breaker, only use one
with the following symbol:
z. The presence of this
symbol is the only way to
ensure that it complies with
all
applicable regulations.
:
Warning
Risk of electric shock /
fire / material damage /
damage to the device!
If the connecting cable of the
device is changed or damaged,
it may cause an electric shock,
short circuit or fire due to
overheating.
The connection cable must
not be kinked, pinched or
modified and must not
come into contact with
heat sources.
:
Warning
Risk of fire / material
damage / damage to the
device!
The use of
extension cords or
power strips can lead to fire
due to overheating or short
circuit.
Plug the device directly into a
properly installed grounded
outlet. Do not use extension
cords,
power strips or multi-way
sockets.
NL
7
Advertisement
Table of Contents
