Table of Contents
Advertisement
NL
Operation of the device
Cancel the program
For programs washing at high
temperatures:
1.
touch the aStart/Refill button
On.
2.
To cool laundry: select
FlushOh .
3.
touch the aStart/Refill button
On.
For programs washing at low
temperatures:
1.
touch the aStart/Refill button
On.
2.
Choose 0[Spin/Drain.
3.
touch the aStart/Refill button
On.
For programs in the drying process:
1.
Turn the program selector to any other
program.
2.
Wait a few minutes for the laundry to
cool and the door to unlock.
Program end
"Ÿš (End) lights up in the display and the ~
and O displays are off.
When you 2 selected, the water is only
pumped out after rinsing; there will not be
centrifuged.
Clues
When •©£ (hot) flashes on the display
■
before the
drying program is completed, the
temperature in the drum is high. The
drum cooling program is carried out
until the temperature in the drum is
decreased.
42
If you do not take out the laundry within
■
15 minutes after the drying process is
completed, the anti-crease process will
start to prevent the laundry from
creasing. The process takes
approximately 30 minutes.0:00, £'˜,̃ £©
and "Ÿš are shown alternately in the
display and the symbol V is displayed
as the status symbol. You can touch
any button to start this process
to end. The door is then unlocked
and the laundry can be removed.
Ve removing the laundry /
turning off the device
1.
Set the program selector to From.
2.
Open the door and take the laundry out
of the drum.
3.
Turn off the water tap.
Note:
Not necessary for Aqua-Stop
models.
Clues
Do not leave any laundry in the drum.
■
They may shrink with the next wash
or other
discolor laundry.
Remove all foreign objects from the
■
drum and from the rubber
seal off – risk of rust.
Wipe the rubber seal dry.
■
Leave the door and detergent
■
drawer open to allow any residual
water to evaporate.
Advertisement
Table of Contents
