Table of Contents
Advertisement
The drain hose at the siphon is
clogged
1.
Turn the program selector to From.
Remove the plug from the socket.
2.
Loosen the hose clamp. Carefully
remove the drain hose; residual water
can escape.
3.
Clean the drain hose and the
siphon connection.
4.
Reinstall the drain hose and secure
the connection point using the hose
clamp.
The filter in the water supply is
clogged
Reduce the water pressure in the
supply hose:
1.
Turn off the water tap.
2.
Choose any program (except O
Flush, 0
Spin, [Drain
programs).
3.
Select the aStart/Refill
button. Let the program run
for approx. 40 seconds.
4.
Turn the program selector to From.
5.
Remove the plug from the socket.
Cleaning and maintenance
Clean the filters:
1.
Disconnect the hose from the back of
the device.
2.
Use pliers to remove the filter.
3.
Clean the filter with a small brush.
4.
Connect the hose and check for leaks.
NL
47
Advertisement
Table of Contents
