Table of Contents
Advertisement
NL
Malfunctions and how to fix them
Malfunctions
The spin result is
■
not satisfactorily.
Laundry wet/too damp.
The spin cycle becomes No fault: the imbalance detection system corrects an imbalance.
several times
fed.
The program lasts
ger than usual.
The length of the program
changes over time
during the wash cycle.
Odors, staining in
the device.
Loud noises, vibration
and "movement" of the
device during the centri-
fugue cycle.
The indicator lights of
the display panel work
not while the appliance is
running.
There is detergent
residue on the laundry.
Centrifuge noise during the
drying phase.
Lint on the laundry.
52
Cause/Solution
Not a malfunction: the imbalance detection system has interrupted the
spin cycle because the laundry was unevenly distributed. Distribute
small and large items of laundry evenly in the drum. Is additional
program settingpAnti wrinkle chosen (depending on the model)?
■
Is additional program setting silent wash or program Night
■
program chosen (depending on the model)? Is the selected
speed too low?
■
Not a malfunction: the imbalance detection system corrects an
■
imbalance by dividing the laundry several times.
Not a fault: the foam detection system has been activated – a rinse cycle has
■
been activated.
Not a malfunction – the program sequence is optimized for the
specific washing process. This may affect the duration of the
program displayed on the display panel.
Enter it Cotton i90°C program without laundry. Add
washing powder or detergent with bleach.
Note:
To avoid foaming, use only half the amount of detergent
recommended by the detergent manufacturer. Do not use
detergents intended for woollens or delicates.
Is the appliance leveled?~ " Couples" on page 20
■
Are the legs of the appliance secured? Secure the legs of the
■
device.
Have the transport locks been removed?~ " Removing the
■
Transport Locks" on page 16
Has there been a power outage?
■
Have the fuses blown? Reset/replace the fuses.
■
If the fault occurs repeatedly, please contact customer service.
■
Some phosphate-free detergents contain residues that are not
■
water-soluble.
Choose FlushOor brush the laundry after washing.
■
This is an innovative process called 'thermal centrifugation' and is
intended to reduce energy consumption during drying. The process is
designed like this, wait for the program to finish.
Run the (cold) program Cottoni —without laundry and detergent to
remove fluff that has accumulated in the drum during the previous
drying cycle.
Advertisement
Table of Contents
