Upnp Discovery; Webdav - Xerox WorkCentre 7232 System Administrator Manual

UPnP Discovery

This page allows you to configure the UPnP settings.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity]
folder.
3.
Select the plus symbol [+] to the left of the [Protocols] folder.
4.
Select [UPnP Discovery].
5.
Set up the following option displayed in the frame.
• Port Number – Specify the UPnP port number.
6.
Select [apply] To reflect the new setting.
7.
Enter the user ID and passcode, and then select [OK].
NOTE: The default user ID is "11111" and the default passcode is "x-admin".
8.
When the reboot message appears, select [Reboot Machine].

WebDAV

This page allows you to configure the WebDAV settings.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity]
folder.
3.
Select the plus symbol [+] to the left of the [Protocols] folder.
4.
Select [WebDAV].
5.
Set up the following option displayed in the frame.
• Port Number – Specify the port number.
• Connection Time-Out – Allows you to specify the connection time-out period
6.
Select [Apply] to reflect the new setting.
7.
Enter the user ID and passcode, and then select [OK].
NOTE: The default user ID is "11111" and the default passcode is "x-admin".
8.
When the reboot message appears, select [Reboot Machine].
Xerox WorkCentre 7232/7242 System Administration Guide
when transmission fails.
Using CWIS to Configure Settings on the Machine
65