Xerox WorkCentre 7232 System Administrator Manual page 161

NOTE: If you do not wish to use the IP filter feature, select [Disabled].
NOTE: If you enable IP Filtering at the machine user interface without first configuring
it through Internet Services, then you will not be able to access the machine's Internet
Services web page or print to the machine.
11.
When you have finished establishing TCP/IP, select [Close] on the [Protocol
Settings] screen.
Finally, set the other items required for the Internet Fax feature.
1.
In [Connectivity & Network Setup].
2.
Select the following items, and then [Change Settings].
• [Machine's E-mail Address/Host Name]
• [Outgoing/Incoming E-mail Settings] > [POP3 Server Settings]: when receiving
• [Outgoing/Incoming E-mail Settings] > [SMTP Server Settings]: when sending
• [Outgoing/Incoming E-mail Settings] > [Domain Filtering]: if required
• [Other Settings]
• [Security Settings] > [S/MIME Settings]
Xerox WorkCentre 7232/7242 System Administration Guide
– E-mail Address
– Machine Name
– Host Name
– Domain Name
E-mail via POP3
– POP3 Server Name/Address
– POP3 Server Port Number
– POP3 Server Check Interval
– POP3 Server Login Name
– POP3 Server Password
– POP3 Password Encryption
or receiving E-mail via SMTP
– SMTP Server Name/Address
– SMTP Server Port Number
– E-mail Send Authentication
– SMTP AUTH Login Name
– SMTP AUTH Password
– Domain Filtering
– Domain 1 to 50
– E-mail Receive Protocol
– Output Destination for E-mail
Internet Fax Installation
151