Installing The Drivers And Utilities For Macintosh Os X Version 10.5 And Later - Xerox WorkCentre 6505N User Manual
Color laser multifunction printer
Hide thumbs
Also See for WorkCentre 6505N:
- Brochure (4 pages) ,
- Evaluator manual (28 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
4.
When the installer is done, click Finish.
5.
The Windows Found New Hardware Wizard appears again. This time, select Yes, this time only,
then click Next.
6.
Select Install the software automatically, then click Next.
7.
The wizard searches for your printer and lists the associated .inf files. Select the .inf file that
corresponds to your Windows operating system:
•
Vista - d:windows scan\x86vista\xrsmnim.inf
•
XP, Windows Server 2003 - d:windows scan\x86\xrsmnim.inf
•
Vista 64 bit - d:windows scan\x64vista\xrsmnim.inf
•
XP 64 bit - d:windows scan\x64\xrsmnim.inf
8.
Select Next.
9.
The installer runs and completes the installation.
You can now print and scan. For information about printing see
about scanning see
Scanning
Installing the Drivers and Utilities for Macintosh OS X Version 10.5 and
Later
To access all features of the printer, you must:
•
Install the print driver
•
Install the scan driver
•
Add the printer
Note:
Before installing drivers, verify that the printer is plugged in, turned on, and connected by
USB or to an active network. Make sure that the printer is receiving network information by
monitoring the LEDs on the back of the printer near the Ethernet cable jack (RJ45). When the
printer is connected to a functioning network and receiving traffic, the link LED is green, and its
amber traffic LED is flashing rapidly.
Installing the Print Driver
The installation process for Macintosh OS X is the same for versions 10.5 and later.
To install the print driver from the Software and Documentation disc:
1.
Insert the Software and Documentation disc into the appropriate drive on your computer.
If the Software and Documentation disc is not available, download the latest drivers from
Note:
www.xerox.com/office/6505MFPdrivers.
On your desktop, double-click the WorkCentre 6505 icon.
2.
3.
Double-click WorkCentre 6505 Installer.
4.
At the Introduction installer window, click Continue.
5.
Acknowledge the warning notice, then click Continue.
6.
Read the license agreement, click Continue, then click Agree.
Click Install.
7.
on page 111.
WorkCentre 6505 Color Laser Multifunction Printer
Installation and Setup
Printing
on page 55. For information
41
User Guide
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
