Xerox WorkCentre 6505N User Manual page 179

When moving the printer:
• Always use two people to lift and move the printer.
• When lifting the printer, grasp the areas as shown in the illustration.
Note: Configured with
the optional duplex unit
and 250-sheet feeder,
the printer weighs
34.5 Kg (76 lb.). Do not
move them together.
Move the Tray 2
assembly and the
printer separately.
• Do not tilt the printer more than 10 degrees to the front or back, or left or right. Tilting the printer
more than 10 degrees can cause toner spillage.
CAUTION: Failure to repackage the printer properly can result in damage to the printer not
covered by the Warranty, Service Agreement, or Total Satisfaction Guarantee.
After moving the printer:
1. Reinstall any parts you removed. If you removed the 250-sheet feeder, put the printer back on top
of it.
2. Reconnect the printer to the cables and power cord.
3. Plug in and turn on the printer.
4. Adjust the color registration before using the printer. For details, see
page 199.
30 kg
66.1 lb.
wc6505_002
Color Registration
WorkCentre 6505 Color Laser Multifunction Printer
Maintenance
on
179
User Guide