Misfeed At Duplex Paper Feed Section - Olivetti PF-P09 Service Manual

16. JAM DISPLAY
16.3.7

Misfeed at duplex paper feed section

A. Detection timing
Type
Detection of • The paper does not unblock the registration sensor (PS5) even after the lapse
misfeed at duplex
paper feed section
B. Action
Registration sensor (PS5)
Duplex conveyance roller clutch (CL13)
Step
1 Initial check items
2 Check the connector between M2-PRCB
PJ11 for proper connection and correct as
necessary.
3 Check the M2 connector for proper drive
coupling and correct as necessary.
4 Check the connector between PS5-PRCB
PJ23 for proper connection and correct as
necessary.
5 Check the connector between CL13-relay
CN20-PRCB PJ14 for proper connection
and correct as necessary.
6 PS5 sensor check
7 CL13 operation check
8 M2 operation check
9 Change PRCB.
276
of a given period of time after the paper feed sequence has been started at the
duplex.
Relevant Electrical Parts
Action
Field Service Ver. 1.1 May 2011
Description
Printer control board (PRCB)
Main motor (M2)
WIRING DIAGRAM
Control Signal
-
-
-
-
-
PRCB PJ23-3 (ON)
PRCB PJ14-5 (REM)
PRCB PJ11-10 to 13
-
Location
(Electrical Com-
ponent)
-
-
-
-
-
K-8
F-2
B-8
-