Manual Trans; Basic Settings - Center Id; Basic Settings - Web Server; Basic Settings - Encryption - Olivetti PF-P09 Service Manual

Field Service Ver. 1.1 May 2011
13.15.7

MANUAL TRANS.

A. Use
• Use when enabling the manual transmission for the CS Remote Care.
• Not displayed in the following cases.
The machine is not registered in the center.
The maintenance is already provided.
B. Procedure
1. Select [SERVICE MODE] [PS / PCL] [CS REMOTE CARE] [MANUAL TRANS.].
2. Select [YES], and press the Select key to start manual transmission.
13.15.8

BASIC SETTINGS - CENTER ID

A. Use
• Registers and checks the Center ID for the CS Remote Care.
B. Procedure
1. Select [SERVICE MODE] [PS / PCL] [CS REMOTE CARE] [BASIC SET-
TING] [CENTER ID].
2. Press the [CENTER ID].
3. Enter the ID number using the software keyboard.
13.15.9

BASIC SETTINGS - WEB SERVER

A. Use
• Registers and checks the Web Server which is used for communication with the CS
Remote Care.
B. Procedure
1. Select [SERVICE MODE] [PS / PCL] [CS REMOTE CARE] [BASIC SET-
TING] [WEB SERVER].
2. Press the [WEB SERVER].
3. Enter the server address or domain name using the software keyboard.

13.15.10 BASIC SETTINGS - ENCRYPTION

A. Use
• Sets whether or not to enable encryption for communication with the CS Remote Care.
B. Procedure
1. Select [SERVICE MODE] [PS / PCL] [CS REMOTE CARE] [BASIC SET-
TING] [ENCRYPTION].
2. Select [YES] or [NO], and press the Select key.

13.15.11 BASIC SETTINGS - COMM. METHOD

A. Use
• Sets the communication method for the CS Remote Care.
Simplex: One-way communication
Duplex: Two-way communication
B. Procedure
1. Select [SERVICE MODE] [PS / PCL] [CS REMOTE CARE] [BASIC SET-
TING] [COMM. METHOD].
2. Select [SIMPLEX] or [DUPLEX], and press the Select key.
13. SERVICE MODE
179