Xerox WorkCentre 3550 Quick Use Manual page 11

3. Squeeze the rear guide and move from the
current position and into the correct
position for the paper size. Make sure the
guide clicks into place.
4. Load paper into the tray. Do not fill above
the 28lb (105g) line at the rear of the tray.
5. Position the side guide by squeezing the
lever and sliding it towards the stack of
paper, until it gently touches the side of the
stack.
6. Insert the paper tray into the machine.
7. After loading paper in the paper tray, set
the paper size and type using the control
panel. Press OK to confirm the settings or Stop to change the settings.
These settings will apply to Copy and Fax modes.
For workstation printing, select the paper size and type in the application
program you use on your workstation.
Note: The settings made from the print driver override the settings on the
control panel.
Xerox WorkCentre 3550
Quick Use Guide
English
11