Install The Workcentre 3550; Configure The Machine - Xerox WorkCentre 3550 Quick Use Manual

English

Install the WorkCentre 3550

1. Unpack the machine and any hardware options and locate the
Installation Instructions.
2. Follow the Installation Instructions to assemble the machine and
hardware options:
Standard Features
Hardware Options
In addition you will have:
Power Cord, Software Installation CD (containing the software, printer
drivers and user documentation), Quick Use Guide (this book), Print
Cartridge, Control Panel labels, Product Enablement Key and a Telephone
Cable.

Configure the Machine

Once the machine has been assembled it must be configured. This is done
using the Product Enablement Key when the machine is switched on for the
first time.
The Product Enablement Key is delivered in a plastic tube inside the box with
the machine. The procedure to configure the machine is as follows:
1. Locate the tube containing the Product
Enablement Key. Remove the plastic card
and carefully press out the key.
2. Connect the Power Cord to the machine
and a suitable power supply outlet.
6 Xerox WorkCentre 3550
Quick Use Guide
Copy, Fax, Print, Scan, E-mail
Document Feeder
Tray 1
Bypass Tray
Tray 2
Stand
256 MB Extended Memory
Foreign Device Interface