Making Copies - Xerox WorkCentre 3550 Quick Use Manual

English

Making Copies

1. Load the documents to be copied face up in the Document Feeder or face
down to the rear left corner of the Document Glass.
2. Press the Copy button on the control panel.
3. Select the control panel features required:
• Press the Paper Supply button and use the up/down arrows to select
the paper tray required for the job or to select Auto. Select OK.
• Press the 2 Sided button and use the up/down arrows to select the 2
Sided option required for the job. Select OK.
4. Select the additional Copy features required for the job.
Press Menu and use the up/down arrows to highlight the feature required
and press OK. Select the setting required and press OK. The following
features are available:
Reduce/Enlarge
Lighten/Darken
Original Type
Background
Suppression
Layout
Collation
Original Size
Press Back to return to the Copy screen.
5. Enter the number of copies required using the keypad and then press
Start.
Press the Job Status button on the Control Panel to display status information
about the job or to delete the job from the list.
22 Xerox WorkCentre 3550
Quick Use Guide
Using this option, originals can be reduced or
enlarged between 25% and 400%.
Adjusts the lightness or darkness of the output.
Use to enhance the copy quality of the output based
on the type of original being copied.
Use to automatically reduce or eliminate the dark
background resulting from scanning colored paper or
newspaper originals.
This provides access to Normal, 2 Up, 4 Up, ID Card
Copy, Book Copy, Booklet Creation, Poster Copy and
Clone Copy.
Use to select collated or uncollated output.
Use to specify the size of the image to be copied.