Sample Set - Xerox Document Centre 240 Reference Manual

Sample Set

This feature is ideal if you want to review your output to ensure that
it is exactly what you expect before printing a large quantity.
Sample Set will print out one complete set, and then place the
remaining job on hold in the Job Queue.
Access the job queue by pressing the Job Status button, then touch
your job on the screen to access an additional screen. If the output is
acceptable, press Release and the programmed number of sets will
be produced. If the output is not acceptable, press Delete to delete
the job from the queue. Reprogram and rescan the entire job.
Page 4 - 34 Xerox Document Centre Reference Guide