Setting up your Internal Auditron System
How to get here
Tools Screen 1
Access and
Accounting
Access and
Accounting
Internal
Auditron
Setup
After your Auditron plan is complete, you have to enter the
information into the Document Centre.
Detailed descriptions of each of the screens are found on the
following pages.
Initializing the Auditron System
1. Go to the first Tools screen and open the Access and Accounting
2. Press the Internal Auditron Setup button. If it is not selectable,
3. Press the Auditron Initialization button and enter the number of
Page 10 - 12
Screen.
press the Authentication button then press the Internal Auditron
button and Close.
User Accounts you identified on your planning matrix. The
Document Centre will automatically determine the number of
General Accounts. Press the Initialize Auditron button to clear
the memory and allow the device to accept new information.
Xerox Document Centre Reference Guide