System Settings Screen 2 - Xerox Document Centre 240 Reference Manual

System Settings Screen 2

Measurements Establish the measurement units and the numeric separator.
Refer to page 9-26
Document Scanner Changes the default size zone settings for documents fed into the
Size Sensing Document Feeder.
Refer to page 9-27
Relative Humidity This allows you to reduce the amount of paper curl in the output
Adjustment copies.
Refer to page 9-28
Display Options Provides a choice of scanning sequence for bound originals and
reading sequence for booklets. This is useful for copying books or
Refer to page 9-29
creating booklets that read either left to right or right to left.
Reduce / Enlarge Sets the presets (on this screen in ST models) displayed on the Basic
Presets Copying Tab and when Normal or Custom R/E is selected.
Refer to page 9-25
Job Sheets Provides the choice of printing information sheets such as Banner
sheets, Error sheets, Fax Status sheets, and Scan Status sheets. You
Refer to page 9-24
can choose the type of stock they are printed on.
Image Rotation Enables the automatic image rotation when Auto% or Auto Paper is
selected. (On this screen in DC models)
Refer to page 9-30
Output Options On this screen in DC models. Refer to the next page for details.
Refer to page 9-33
Single Job Mode Limits the job queue by allowing one copy job at a time. (DC models
only).
Refer to page 9-32
Xerox Document Centre Reference Guide
System Tools
Page 9 - 9