Table of Contents
Advertisement
12. CLEAN-UP AFTER INSTALLATION
When cleaning up after installation, do not use
abrasive cleansers as they may scratch and dull the
bath surface. Use warm water and a liquid detergent to
clean the surface.
13. CONFIRM PROPER OPERATION
A. START-UP BODYSPA
Refer to Important Information on Page 2.
Please perform the following so the owner can safely
receive the benefits of their BodySpa.
S Fill the footbath to the overflow level.
Water temperature in the bath should not exceed
104_F (40_C).
Kohler Co., Kohler, WI U.S.A.
Stubborn stains, paint, or tar can be removed with
turpentine or paint thinner. Do not allow cleaners
containing petroleum distillates to remain in
contact with bath surfaces for long periods of time.
Plaster can be removed by scraping with a wood edge.
Do not use metal scrapers, wire brushes, or other metal
tools. A powder-type detergent may be used on a damp
cloth to provide mild abrasive action to the residual
plaster.
13
AB
114825-2-
Advertisement
Table of Contents
