Table of Contents
Advertisement
5 PREPARING THE APPLIANCE FOR USE
Convey the dishwasher to the installation site, remove the packaging and check the appliance and
components for damage; any damage found must be reported to the transporter in writing. The
packaging components (plastic bags, expanded polystyrene, nails, etc.) must not be left within reach
of children and pets since they are potentially dangerous. All packaging materials used are
environment-friendly. They can be kept without constituting any hazard, or may be disposed of at
a specialist waste disposal centre. The plastic components suitable for recycling are marked as
follows:
PE - polyethylene: external packaging film, bag containing the instructions, protective bags.
PP - polypropylene: straps used to close the packaging.
PS - expanded polystyrene: corner guards, top of packaging.
Wooden and cardboard components can be disposed of in accordance with the local regulations.
All operations described in this section must be carried out and/or checked by the
qualified staff who install and commission the dishwasher.
5.1 Positioning and installation
Place the dishwasher in the chosen point and remove the protective film. Level the dishwasher
(with the aid of a spirit level) on its four feet, adjusting them to ensure that it is stable. If the
dishwasher is installed above the ground, make sure that the stand and dishwasher are secured
properly and do not constitute a hazard.
The systems and premises in which the dishwasher is installed must comply with the
relevant regulations.
If the dishwasher is installed next to another appliance, also check the
recommendations provided by the manufacturer of the adjacent appliance.
Installations other than those described must first be approved by the manufacturer.
Use only professional furnishings and units in the vicinity of the dishwasher. Any
other types of furnishing may be damaged.
11
Advertisement
Table of Contents
