Program Change - Smeg UG511DUK Translation Of The Original Instructions

9.4 Program change

N.B.:
During heating of the water in the boiler and tank with the cycle running, the tank heating element
and boiler heating element
Tank heating does not start until heating of the boiler is completed.
Filter presence sensor (on some models only)
The filter is fitted with a sensor which checks that it is properly fitted; if it is not in the correct
position, the word "FiLTER" appears on the display.
With program started, press
interrupt it.
Change the program by pressing
Confirm the program start by
down for 1 second (light L2 turns blue again).
symbols may appear on the display.
27
and hold it down to
pressing and hold it