Table of Contents
Advertisement
9.4
Starting off
Info
When you are riding, the side stand must be folded up and secured with the rubber strap.
–
Pull the clutch lever, shift into first gear, release the clutch lever slowly and at the same time open the throt-
tle carefully.
9.5
Quickshifter (All special models)
9.6
Activating the quickshifter (All special models)
–
Press the TC button
Guideline
Engine speed
The TC LED lights up when the traction control is acti-
vated.
F03760-11
When the quickshifter is activated, you can shift up without actu-
ating the clutch.
Info
The quickshifter is not activated when shifting up from first
to second gear, and the clutch lever must be used when
shifting up instead.
Even if the quickshifter is activated, you need to use the
clutch lever to shift down.
Because there is no need to close the throttle grip, uninterrupted
gear shifts are possible.
The quickshifter uses the shifter shaft position to check whether or
not a shift should be initiated, and sends a corresponding signal to
the engine control.
If the quickshifter is deactivated, the clutch needs to be actuated
in the normal way for each shift.
S05784-10
–
Press the QS button
The QS indicator lamp lights up when the quickshifter is
activated.
Info
The quickshifter is not activated when shifting up from
first to second gear, and the clutch lever must be used
when shifting up instead.
Even if the quickshifter is activated, you need to use
the clutch lever to shift down.
F03760-12
RIDING INSTRUCTIONS 9
1
to switch traction control on or off.
≤ 4,000 rpm
1
to switch the quickshifter on or off.
43
Advertisement
Table of Contents
