Table of Contents
Advertisement
7.21
Display mode SPEED/S1 (stop watch 1)
7.22
Display mode SPEED/S2 (stop watch 2)
7.23
Table of functions
Display
Press the but-
ton
for 2–3
seconds.
Display mode
The display
SPEED/H (oper-
changes to
ating hours)
the functions
setup menu.
Press the but-
ton
for 2–3
seconds.
Briefly press
the button
.
–
Repeatedly press the button
top right of the display.
S1 (Stop watch 1) shows the riding time based on TR1 and contin-
ues running as soon as an impulse arrives from the wheel speed
sensor.
The calculation of this value starts with the first impulse from the
wheel speed sensor and ends 3 seconds after the last impulse.
Press the but-
ton
for 2–3
400327-01
seconds.
Briefly press
the button
.
Press the but-
ton
for 2–3
seconds.
Briefly press
the button
.
–
Repeatedly press the button
top right of the display.
S2 (Stop watch 2) is a manual stop watch.
If S2 is running in the background, the display S2 flashes.
Press the but-
ton
for 2–3
seconds.
Briefly press
the button
.
400328-01
Press the but-
ton
for 2–3
seconds.
Briefly press
the button
.
Briefly press
Press the but-
the button
.
ton
for 2–3
seconds.
Next display
No function
mode
COMBINATION INSTRUMENT 7
No function
No function
briefly until S1 appears at the
Displays of TR1, A1 and S1 are reset to 0.0.
Next display mode
No function
No function
briefly until S2 appears at the
The displays of S2 and A2 are set to 0,0.
Next display mode
No function
Starts or stops S2.
Briefly press
Wait 3 - 5
the button
.
seconds.
No function
Wait 10 - 12
seconds.
33
Advertisement
Table of Contents
