Table of Contents
Advertisement
Level Adjustment Section
In the level adjustment section you can adjust the
output signal selected in the output selection section.
When IMAGE ENHANCER is selected in the output
selection section, you can make adjustments for the
image enhancer.
1 MASTER/MASTER/–/H CROP•V LETTER adjustment knob and UNITY button
2 HD-NTSC•NTSC-HD conversion mode selection buttons
7 SYNC PHASE/SYNC PHASE/FREQUENCY
adjustment knob and PRESET button
1 MASTER/MASTER/–/H (horizontal)
CROP•V(vertical) LETTER adjustment knob and
UNITY button
Carry out the following adjustment, according to the
output selection. Pressing the UNITY button returns to
the center value (the factory default setting), and the
button and the "U" indicator light.
When HD is selected: Master gain adjustment
(simultaneously adjust the Y/P
When D1 is selected: Master gain adjustment
(simultaneously adjust the Y/B–Y/R–Y signals)
When D2 is selected: Not used
3 Y/Y/VIDEO/DETAIL GAIN adjustment knob and UNITY button
4 P
/B–Y/CHROMA/LIMITER adjustment knob and UNITY button
B
5 P
8 FINE/FINE/H/V RATIO adjustment knob
and PRESET button
9 –/CROSS COLOR/GAMMA adjustment
knob and PRESET button
/P
signals)
B
R
/R–Y/HUE/CRISP adjustment knob and UNITY button
R
6 SETUP/–/SETUP/DEPEND adjustment knob and UNITY
button
When IMAGE ENHANCER is selected: Horizontal
cropping position in the edge crop mode with a
down-converter (Hold down the CROP button
while turning the H CROP knob for the fine
adjustment.), and horizontal position of the HDTV
image in the edge crop mode and vertical cropping
position in the letter box mode with an up-
converter
5
Advertisement
Table of Contents
