Calibrate Paper Settings from a Print Server
This mode enables you to select a paper source before you calibrate the
paper settings from the optional imagePRESS Server.
NOTE
[Calibrate Paper Set. From Print Server] is displayed only if the optional
imagePRESS Server is installed.
1
Load the paper that you want to calibrate from the
imagePRESS Server in the desired paper deck.
NOTE
For more information on loading paper, see "Paper Decks," on p. A7-2.
2
Register the loaded paper.
NOTE
For more information on registering paper, see "Identifying the Paper Size/
Type in a Paper Source," on p. A4-26.
3
➞ [System Settings] ➞ [Calibrate Paper Set. From
Press
Print Server].
4
Select the paper source in which you loaded the paper to
calibrate.
5
Press [OK].
NOTE
To enable this function, you need to select [Auto Select] for [Input Tray]
from the imagePRESS Server. For more information, see the instruction
manual for the imagePRESS Server.
Calibrate Paper Settings from a Print Server
A6-138