Reading Messages From The System Manager; Types Of Message Boards - Canon imagePRESS C7000VP Reference Manual

Reading Messages from the System Manager

The System Manager uses the Message Board feature to convey
messages to the users of this machine. The messages are sent
through the Remote User Interface and displayed on the touch panel
display. (See Chapter 3, "Customizing Settings," in the Remote UI
Guide.)
NOTE
• The message board can be used only if the machine is connected to a
network.
• For instructions on erasing the message board, see "Clearing the Message
Board," on p. A6-19.

Types of Message Boards

The following three types of message boards are available:
■ A Message Board without [Done]
■ A Message Board with [Done]
If you press [Done] and close the message board, you can perform
normal operations. The message appears again when the main
power is turned OFF, and then turned back ON again, or after the
Auto Clear mode has initiated.
NOTE
The Auto Clear mode does not activate if Auto Clear Time is set to '0'. (See
"Auto Clear Time," on p. A4-55.)
■ A Message Board Where the Message Appears in the
Job/Print Status Display Area
Job/Print Status Display Area
Overview of the imagePRESS C7000VP/C6000VP/C6000 A2-14