Canon imagePRESS C7000VP Reference Manual page 386

14
Align the inner size change plate with the marks for the
desired paper size.
IMPORTANT
• Make sure to align the size change plate properly with the marks for the
desired paper size. There are two marks for paper size at the top of the
paper deck. Align the size change plate with the desired marks.
• Make sure that the size change plate is properly aligned with the marks for
the desired paper size. If the size change plate is not properly aligned, the
paper deck may become damaged.
B4
B5
11 17/LTR
A3
A4
12 18
305 457 12 5 / 17 11 /
mm mm 8 16
320 mm 450 mm
13 19
(SRA3)
330 483
mm mm
15
When you have finished aligning the inner size change
plate with the marks for the desired paper size, fix the inner
size change plate with the two blue screws using a coin or
something similar, while slightly holding its centre front
portion, and pressing it away from you.
Fasten the right screw before fastening the left screw.
IMPORTANT
If you fasten the blue screw without pressing the inner size change plate
away from you, the plate may be fixed at an angle. If you use the paper
deck with a tilted inner size change plate, paper may be fed as slanted, poor
print quality may result, and paper jams may occur. Therefore, make sure to
fasten the blue screw while pressing the inner size change plate away from
you.
Paper Deck-AC1 (Optional) A7-31