Canon imagePRESS C7000VP Reference Manual page 369

Hide thumbs Also See for imagePRESS C7000VP:

Table of Contents

• If a message prompting you to load paper appears during printing, the

remaining prints are automatically made after you load the correct paper. If

you select another paper source, the remaining prints are made after you

• When changing the paper to load into the POD Deck from plain paper to

coated paper, you may wait a moment because temperature control of the

warm air which fans a paper is required.

Press the button on the paper deck in which you want to

If the machine is in the Sleep mode (the touch panel is not displayed, and

only the main power indicator is lit), you may not be able to open the paper

deck even if you press the open button. In this case, press the control panel

power switch to reactivate the machine, and then press the open button.

Grip the handle, and pull out the paper deck until it stops.

The inside lifter automatically descends to the paper loading position.

Open a package of paper, and remove the paper stack.

When loading paper, take care not to cut your hands on the edges of

Rewrap any remaining paper in its original package, and store it in a dry

place, away from direct sunlight.

POD Deck-A1/Secondary POD Deck-A1 (Optional)

Imagepress c6000vp Imagepress c6000