Table of Contents
Advertisement
Disassembly
Removing the CCD
Figure 18
CCD Removal
1. Turn off the computer, turn it over and remove the battery
2. Open the LCD and carefully remove the rubber screw covers
a. Remove the rubber co-
screws
vers and screws.
b. Run your fingers around
3. Run your finger around the inner frame of the LCD panel at point
the inner frame to unsnap
around the outer frame of the LCD panel at points
the LCD panel at point
4. Remove the LCD front panel
5
and run your fingers
around the outer frame of
a.
the LCD panel to unsnap.
c. Remove the LCD front
panel.
c.
9. LCD Front Panel
•
2 Screws
2 - 22 Removing the CCD
&
from the front cover.
3
4
from the LCD assembly and the CCD module will be visible at point
9
1
3
10
(page 2 -
5).
&
and set them aside
1
2
to unsnap the frame, and then run your fingers
5
,
&
to unsnap it
(Figure
6
7
8
b.
8
2
4
9
(Figure
18a) and
18b).
.
10
7
6
5
Rubber Screw Covers
After removing the rubber
screw covers, place them on a
clean dry surface (or attach
them to the front cover itself)
in order to prevent loss of ad-
hesive.
Advertisement
Table of Contents
