Removing And Installing The Component Bay Cover - Clevo W340EU Service Manual

Disassembly

Removing and Installing the Component Bay Cover

Figure 2
Bay Cover Removal
To upgrade any components you need to remove the component bay cover first. The procedure for removing the com-
(W340EU)
ponent bay cover will depend upon your particular computer model:
a. Remove the screws.
Component Bay Cover Removal Procedure
b. Slide the bay cover in the
direction of the arrow.
(W340EU)
c. Lift the bay cover off the
1. Turn off the computer, turn it over, and remove the battery
computer.
2. Locate the component bay cover and remove screws
3. Slide the cover in the direction of arrow
4. Remove the component bay cover

4. Bay Cover
• 2 Screws
2 - 6 Removing and Installing the Component Bay Cover
3
(Figure
4
a.
1 2
c.
(page 2 - 5).
& (Figure 2a).
1 2
(Figure 2b).
2c).
b.
4
3