EDITION 05/2011
OPERATING MANUAL
5.3
START-UP
5.3.1
GENERAL RULES FOR HANDLING THE SPRAY GUN
➞ Observe general safety instructions in chapter 2.
Unintentional putting into operation!
Risk of injury
Before all work on the unit, in the event of work interruptions and
functional faults:
SIHI_0065_GB
Cleaning agent in the air duct!
Functional faults caused by swollen seals
Always keep the attachment of the spray gun held downwards when cleaning.
Ensure that neither paint nor cleaning agent enters the air duct.
When taking a break from work or when stored for a longer period, the spray gun has
to be positioned correctly with the attachment pointing downwards.
SIHI_0005_GB
Air
Material
Part No. DOC394861
WARNING
Switch off the energy/compressed air supply.
Relieve the pressure from the spray gun and unit.
Secure the spray gun against actuation.
By functional faults: Identify and correct the problem, proceed
as described in chap„Trouble shooting".
CAUTION
B_02674
Trigger safety catch in on
(safe) position
GM 4600AC
19