Table of Contents
Advertisement
EDITION 05/2011
OPERATING MANUAL
2
GENERAL SAFETY INSTRUCTIONS
2.1
SAFETY INSTRUCTIONS FOR THE OPERATOR
Keep these operating instructions to hand near the unit at all times.
Always follow local regulations concerning occupational safety and accident prevention.
2.1.1
ELECTRICAL EQUIPMENT
Electrical plant and unit
To be provided in accordance with the local safety requirements with regard to the
operating mode and ambient influences.
May only be maintained by skilled electricians or under their supervision.
Must be operated in accordance with the safety regulations and electrotechnical
regulations.
Must be repaired immediately in the event of problems.
Must be put out of operation if they pose a hazard.
Must be de-energized before work is commenced on active parts. Inform staff about
planned work, observe electrical safety regulations.
2.1.2
PERSONNEL QUALIFICATIONS
2.1.3
A SAFE WORK ENVIRONMENT
Ensure that the floor of the working area is anti-static in accordance with EN 50053 Part 1,
§7-2, measurement in accordance with DIN 51953.
Ensure that all persons within the working area wear anti-static shoes.
Ensure that during spraying, persons wear anti-static gloves so that they are earthed via
the handle of the spray gun.
Customer to provide paint mist extraction systems conforming to local regulations.
Ensure that the following components of a safe working environment are available:
– Material/air hoses adapted to the working pressure
– Personal safety equipment (breathing and skin protection)
Ensure that there are no ignition sources such as naked flame, glowing wires or hot
surfaces in the vicinity. Do not smoke.
2.2
SAFETY INSTRUCTIONS FOR STAFF
Always follow the information in these instructions, particularly the general safety
instructions and the warning instructions.
Always follow local regulations concerning occupational safety and accident
prevention.
Part No. DOC394861
GM 4600AC
6
Advertisement
Table of Contents
