Table of Contents
Advertisement
W 600 Flexio 18V
2.
Insert the battery into the charger, the battery
charging indicator (9) starts flashing.
If the battery charge indicator lights up
i
constantly when the battery is inserted,
the battery is either fully charged or
overheated and must first cool down.
3.
Once the battery is fully charged, remove the
battery from the charger.
4.
Unplug the mains plug of the charger from the socket.
Battery indicator
Green
=
Sufficient battery charge
Orange
=
Only minor work still possible
Flashing
=
Battery must be charged
orange
9. Preparation of the Coating Material
•
Mix the material well in the original container. When using interior wall paint, an
agitator is recommended.
W 600 has been developed for use with all conventional paints in their undiluted
i
form. If the surface is smooth and the paint you are using is very thick and
gel-like, dilute it by 10%. Dilution can be necessary if the atomisation is
coarse or if the flow rate is too low even at the maximum setting.
Detailed information about the various materials and the maximum permitted
dilution can be found on the manufacturers' technical data sheets (e.g. available
on the Internet).
Spray material that is at least at room temperature provides a better spray
i
result.
10. Start-up
•
Unscrew the container from the spray gun.
•
Aligning suction tube. (Fig. 2)
If the suction tube is positioned correctly, the container contents can be sprayed without
almost any residue.
When working on lying objects: Turn the suction tube forwards. (Fig. 2 A)
Spraying work when working on overhead objects: Turn the suction tube rearwards.
(Fig. 2 B)
•
Place the container on a paper base and pour in the prepared coating substance with the
9
8
EN
17
Advertisement
Table of Contents
