Installing A Switch - Extreme Networks VSP 4900 Series Installation Manual

Installing a Switch

Safety Considerations for Installing Switches
What You Will Need for the Installation
Attach the Switch to a Rack or Cabinet
Installing Optional Components
Installing Internal AC Power Supplies
Turn on the Switch
Connect Network Interface Cables
Before you attempt to install or remove an Extreme Networks switch, read the
precautions in
Extreme Networks switches fit into standard 19-inch equipment racks.
A four-post rack-mounting kit is provided with the switch. A two-post kit can be
ordered separately.
The installation process includes the following tasks:
1. Prepare to install the switch.
See What You Will Need for the Installation
2. Install the switch in the rack.
See Attach the Switch to a Rack or Cabinet
3. Install optional components: optical transceivers and cables.
See the instructions in
4. If your switch does not come with an installed internal power supply, install one or
two power supplies.
See Installing Internal AC Power Supplies
5. Power up the switch.
See Turn on the Switch
6. Connect network interface cables.
See Connect Network Interface Cables
on page 52
Safety Considerations for Installing Switches
Installing Optional Components
Note
Be aware of whether the power supply you are installing is AC-powered or
a DC-powered. The installation instructions are different depending upon
what type of power is used.
on page 52.
VSP 4900 Series Switches: Hardware Installation Guide
on page 46
on page 46
on page 47
on page 49
on page 50
on page 52
on page 46.
on page 47.
on page 49.
on page 50.
on page 52.
on page 46.
45