Extreme Networks VSP 4900 Series Installation Manual page 58

Install an SSD Module
2. Ensure that the switch is completely powered down.
3. Remove the cover plate from the SSD slot (#2 Phillips screwdriver required).
Figure 26: Switch with SSD Rear Panel
4. Remove the SSD module from its packaging.
5. Carefully slide the SSD module into the slot on the rear panel until it is firmly in
place.
Figure 27: Insert SSD Module
6. Secure the SSD module using the screws provided.
58 VSP 4900 Series Switches: Hardware Installation Guide
Installing Expansion Modules