Dust Collection; Turning The Saw On And Off; Transporting The Saw - Delta 36-6013 Manual

DUST COLLECTION

Connect a shop vacuum or dust collection hose to dust port on
back of saw for best dust collection. Dust port is designed for a 2
1/2 inch vac hose. See Figure 43.

TURNING THE SAW ON AND OFF

The ON/OFF paddle switch is located on the left side of the front
panel of the saw.
1. Press the green button
2. Press the switch down to turn the saw OFF.
B
3. When not in use, the saw should be turned off and the power
switch locked out to prevent unauthorized use. To lock out
C
power switch, use a standard long shackle lock, with a shackle
post no larger than 9/32 inch (7mm) diameter.
See Figure 44.

TRANSPORTING THE SAW

1.
Return side extension table to inner position lock side
extension into place.
2.
Stow away the Fence, Miter Gauge, Blade Guard, and
Kickback Pawls.
3.
Lower riving knife to the non-through.
4.
Remove the (4) M8 x 55mm Pan Head Hex Socket Screws
that secure the Saw to the Stand. See "ATTACHING STAND
TO SAW" for further detail.
Once the saw is removed from the stand, it is recommended that
the saw be moved using two people. A possible carry point is the
handle located on the right side of the saw. As seen in Figure 45.
OPERATION
to turn the saw ON.
A
29
FIGURE 43
A
B
C
FIGURE 44
FIGURE 45