Table of Contents
Advertisement
CONTROL WITH A
MICROCOMPUTER
The events memorized in the E-File can be executed bya
microcomputer, a BVE-900 editing control unit, etc. Itis also
possible to control the functions of the SEG-2550/2550P by a
microcomputer. In this section, the outline of the control with
external equipment is introduced. For detailed operation,
please refer to the instruction manuals provided with the
equipment to be used.
When the SEG-2550/2550P is used with a microcomputer, the
events memorized in E-file can be executed. The time to
execute the events memorized in the E-File can be designated
and the events can be executed automatically. To control the
E-File function, Q-Manager, the software of the
SMC-70G/70GP, is necessary.
RGB monitor
VIDEO OUT.
VIDEO IN
VIDEO IN
Remote control cable
RCC-5E or ROC-5F
VIDEO IN
VTR for recording
Be sure to insulate the unused plug (red) with a vinyl tape.
* Forconnections other than to the RM-440, the 75-ohm
coaxial cable, 3C-2V, 5C-2V or equivalent should be used.
38
Advertisement
Table of Contents
