Table of Contents
Advertisement
Adjust the phases, video level, hue, chroma level, etc., of the
connected cameras and VTRs.
1 Adjust the phases of all equipment as follows.
1) Turn the power of all equipment on.
2) Turn the SEG-2550/2550P on.
3) Set the PGM/PST selector to PGM.
4) Set the INDICATION selector to PHASE.
The phase indication lines will appear on the preset
monitor screen.
H phase indicator
'SC phase indicator
5) Press the.1 button of the PST select buttons.
8connectors, repeat steps 5), 6) and 7).
Be sure to adjust the H phase first, then the SC phase.
2 Adjust the color of the video monitors.
Use the color bars generated by the video camera or the
camera control unit to adjust the hue so that the same
color will be obtained on all video monitors.
12
Advertisement
Table of Contents
