Table of Contents
Advertisement
a
p a r e ecto
SCOT WITH THE TAK
The picture on the preset monitor will be the next program
picture. The picture can be checked on the preset monitor.
1 Set the PGMIPST selector
to PST.
3 Press the TAKE button.
The pictures on the preset monitor and program monitor
are interchanged, and the indication of the PGM
indicator and the PST bus select button are also
changed.
Repeat steps 2 and 3 to continue the cut operation.
* The PGM/PST MiX lever should be set at either end, or the
pictures on the preset monitor and program monitor are
mixed.
15
Advertisement
Table of Contents
