Sony SEG-2550 Operating Instructions Manual page 18

WIPE
To select a wipe pattern by simply pressing a wipe pattem
select button, proceed as follows.
5 6. 3 4
Selected wipe
pattern
1 Set the PGMIPST selector to PGM.
2 Press the EFF button of the PST bus select buttons.
The EFF button and EFFECTS indicator light.
3 Press the WIPE button.
The WIPE button and the upper left button of the wipe
pattern select buttons light.
4 select a desired wipe pattern by pressing a wipe pattem Wipe
select button.
The pressed button lights.
* To select the pattern with the pattern code, refer to "TO.
SELECT WIPE PATTERN WITH THE PATTERN CODES".
5 Select the pictures by pressing an A bus select button and
aBbus select button.
6 Move the EFF lever to the other end.
The program picture will be wiped by the selected wipe
pattern.
* The button which corresponds to the program picture
blinks.
* The speed of the interchange depends on how fast you
move the lever.
18