Table of Contents
Advertisement
waft mem teenie Ta area
iften the wipe pattem edge),
Hard edge
1 Set the SOFTIHARD/BDR selector to SOFT.
2 Turn the SOFTNESS/BORDER control to adjust the
softness.
Borderéd
wipe pattem edge
1 Set the SOFT/HARD/BDR selector to BDR.
The edge of the wipe pattem is bordered.
2 Turn the SOFTNESS/BORDER control to adjust the width
of the border.
3 Adjust the color of the border by the BACKGROUND
COLOR stick and the LUM control.
The adjusting method is the same as the background
color, and the color will be the complementary color of
the background color. For details, refer to "HOW TO
SELECT THE BACKGROUND COLOR".
20
Advertisement
Table of Contents
