Table of Contents
Advertisement
3
3.2
Adjusting the touch panel
Adjusting a position to press the Touch Panel
If a Touch Panel key does not respond normally when tapped, it may not be detected properly.
1
Tap [Accessibility] - [Touch Panel Adjustment].
% If a keying error recurs even after [Touch Panel Adjustment] is tapped, press 1 on the Keypad.
2
Tap four [+] keys while checking keying sounds.
% Tap these [+] keys to adjust a position gap. Tap these keys in any sequence.
% To readjust, press C (Clear), then re-tap the [+] keys.
% To stop the adjustment, press the Stop key.
Tapping four [+] keys lights the Start indicator lamp in blue.
3
Press the Start key.
Re-operate the screen that did not respond properly before adjustment, and check that the keying po-
sition is adjusted correctly.
Tips
-
After this procedure, if a keying error recurs, contact your service representative.
Adjusting the brightness of the Touch Panel
Adjust the brightness level of the Touch Panel.
%
Tap [Accessibility] - [Brightness Adjustment], and select [Low] or [High] to adjust the brightness.
3-4
Adjusting the touch panel
d-Color MF552/452/362/282/222
3.2
Advertisement
Table of Contents
