Regular Cleaning - Oki ES9466 MFP Quick Start Manual

Regular Cleaning

Poor quality printing such as uneven and soiled images can be improved by simple cleaning. This section describes the
cleaning methods.
Cleaning for the scanning area, original glass, guides, and platen sheet
We recommend cleaning the following items weekly, so that the originals can be scanned cleanly. Be
careful not to scratch the parts.
• Be careful not to scratch the parts.
• When cleaning the surface of the equipment, do not use such organic solvents such as thinner or benzine.
- This could warp the shape of the surface or leave it discolored.
• When using a chemical cleaning pad, follow the instructions provided with the pad.
2
2
1
1.
Scanning area (surface of the long rectangular glass) /
Wipe it with a soft dry cloth. If there are still stains remaining, wipe with a piece of soft cloth which has been
moistened with water and then squeezed well.
Do not use liquids other than water (such as alcohol, organic solvents or neutral detergent).
3. 4
Guide / . Platen sheet
Clean the surface as follows depending on the stain.
• Clean it with a soft cloth.
• Clean it with a soft cloth lightly moistened with water.
• Clean it with a soft cloth lightly moistened with alcohol, and then wipe it with a dry cloth.
• Clean it with a soft cloth lightly moistened with watered-down neutral detergent, and then wipe it with a
dry cloth.
5.
Scanning area of Dual Scan Document Feeder (surface of the long rectangular glass)
Wipe it with a soft dry cloth. If there are still stains remaining, wipe with a piece of soft cloth which has been
moistened with water and then squeezed well.
Do not use liquids other than water (such as alcohol, organic solvents or neutral detergent).
Cleaning for the front cover
When the front cover has got dirty, lightly wipe it clean with a soft cloth.
• Be careful not to scratch the parts to be cleaned.
• Do not use a hard cloth or dirty cloth or a tissue.
3

Regular Cleaning

4
5
2.
Original glass
3
55