Density adjustment
Press
or
to adjust the density
manually.
To lighten, press
Press [Auto] to adjust the density
automatically.
By default, density adjustment is set to
[Auto] when the color mode is "Black".
, to darken, press
.
Copying from MPT
1
Move the paper holding lever
1
to the outside, and then
place paper face down on the
MPT.
Align the side guides to the paper
2
length and then move the paper
holding lever toward the
equipment.
1
Press the button
3
corresponding to the size of
paper set on the MPT, and then
2
[OK].
Press [Paper Type] if the paper on the MPT is other
than plain paper.
Press the [START] button.
4
Copying from MPT starts.
Copying Operations
2
35
2