Oki ES9466 MFP Quick Start Manual page 12

Chapter 1 PREPARATIONS
Control panel
Make for various operations and settings.
1.
[HOME] button
Displays the home screen.
& P.14 "Names and Functions on the Home
Screen"
2.
[POWER] button
Turns the power on or off.
3.
MAIN POWER lamp
Turns on when the main power switch is ON.
4.
[POWER SAVE] button
Enter or recover from power saving mode.
5.
[AUTHENTICATION] button
For when the department code or user
information has been set.
& P.75 "Logging in"
6.
Digital keys (Optional)
Use to enter numbers.
7.
[PROGRAMMABLE1] button /
[PROGRAMMABLE2] button
Register frequently used functions to these
buttons and press them for quick access.
& MFP Management Guide (PDF) : "Chapter 2:
SETTING ITEMS (ADMIN)"
Do not touch the touch panel under the following status:
• Until the Home screen is displayed after the power is turned ON
• While the equipment is recovering from the Deep Sleep mode
Otherwise, the touched position may not be detected properly. In such a case, reboot the equipment after the
power is turned OFF or it is entered into the Deep Sleep mode.
12
1 2
13 12 11 10
8.
DATA IN MEMORY lamp
Turns on when receiving fax data and fax
communications.
9.
ATTENTION lamp
Turns on when an error occurs and action needs
to be taken.
10.
DATA lamp
Turns on when receiving data such as print data.
11.
[START] button
Starts operations such as copying. The blue
lamp on the left of the button turns on when the
equipment is ready.
12.
[RESET] button
Clears all selected functions and return to the
default settings.
13.
Touch panel
Configure various functions such as copying.
& P.15 "Using the Touch Panel"
3 4 5 6
9 8 7