MJ-1110
1.
Upper receiving stacker
2.
Stapling control section
3.
Hole Punch Unit MJ-6105 Series
4.
Front cover
5.
Stopper
6.
Saddle stitch stacker
7.
Sub-stacker
8.
Lower receiving stacker
9.
Stacker holder
• Open the stacker holder when an attempt to output paper, which has a length longer than that of A3, is made
or if the paper on the Upper receiving stacker does not align itself neatly. The output paper will be more
likely to be aligned properly.
• Pull out the sub-stacker when an attempt to output paper, which is longer than the Lower receiving stacker,
is made. The output paper will be more likely to be aligned properly.
MJ-5015
1.
Stacker
Description of Components
9
1
8
7
6
5
1
2
3
4
1
11