Oki ES9466 MFP Quick Start Manual page 21

Placing originals
Original glass
1
Raise the Original Cover, the Reversing
Automatic Document Feeder, or Dual
Scan Document Feeder.
2
Place the original face down on the
original glass and align it with the left rear
corner.
3
Lower the Original Cover, the Reversing
Automatic Document Feeder, or Dual
Scan Document Feeder.
& Copying Guide (PDF) : "Chapter 2: HOW TO
MAKE COPIES" - "Enlarging or Reducing Images"
Do not place any heavy objects (4 kg (9 lb.) or
over) on the original glass and do not press on it
with force.
Breaking the glass could injure you.
Placing Paper and Originals
Reversing Automatic Document
Feeder / Dual Scan Document Feeder
1
Place the originals face up on the original
feeder tray.
2
Align the side guides to the original length.
• You need to specify the size for the following originals
because the size cannot be detected correctly.
- Highly transparent originals (e.g. overhead
transparencies, tracing paper)
- Totally dark originals or originals with dark borders
- Non-standard size originals (e.g. newspapers,
magazines)
& Copying Guide (PDF) : "Chapter 2: HOW TO MAKE
COPIES" - "Specifying the Paper Size"
• When the Original Cover, the Reversing Automatic
Document Feeder, or Dual Scan Document Feeder is
closed, the scanner lamp flashes to detect the
original size.
• When placing mixed-size originals on the Reversing
Automatic Document Feeder or Dual Scan Document
Feeder, adjust the side guides to the widest original,
and then align the originals against the guide on the
front.
A4-R
( LT-R )
B4
( LD )
21
1