Table of Contents
Advertisement
Condition/Problem
Speed or Incline does not
operates)
®
Heart Rate (HR) not displayed
Speed display is not accurate
Fan will not turn on or will not
turn off
Fan will not turn on, but Console
operates
operates
Console in sleep mode
Power Switch
Power Cord
damage
Console
damage
HR device
®
Heart Rate
Interference
device
Replace HR device
Display set to wrong unit of
Reset machine
Assembly / Owner's Manual
damaged.
Connection should be secure and undamaged. Unplug connector and
nect power to machine for 30 seconds, and then reconnect it.
connector should line up and snap into place.
cable.
Replace Console if damaged.
If the above steps do not resolve the problem, contact Customer Service (if
cable.
connector should line up and snap into place.
Replace Console if damaged.
If the above steps do not resolve the problem, contact Customer Service (if
contact area is wet.
If HR device has replaceable batteries, install new batteries (the provided
heart rate armband does not have replacement batteries).
armband.
If interference is eliminated and HR does not function, replace HR device.
If the above steps do not resolve the problem, contact Customer Service (if
Change display to show correct units.
Unplug unit from electrical outlet for 5 minutes. Reconnect to outlet.
Unplug unit from electrical outlet for 5 minutes. Remove material from fan. If
necessary, detach the Console to help with removal. Replace the Console if
Move machine to level area.
the wear in period.
55
Troubleshooting
Solution
-
Advertisement
Table of Contents
