Table of Contents
Advertisement
24
4.5
Threading the needle thread
WARNING
Risk of injury from needle tip and moving parts!
Puncture, cutting and crushing possible.
Turn off the machine before threading the thread.
Information
You will find a video with instructions regarding this chapter on
the Commander Delta control panel of the machine.
To start the instructional video:
1.
Switch on the machine.
2.
Click on the tile
A window opens named Threading: one needle.
The instructional video starts automatically.
3.
Click on the tile
The instructional video Threading: two needles starts
automatically.
To thread the needle thread:
1.
Fit the thread reel on the reel stand.
The unwinding bracket must stand directly above the thread
reel.
2.
Feed the thread from the rear to the front through the thread
guide on the unwinding bracket.
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
on the control panel.
in the left menu bar.
Operation
Advertisement
Table of Contents
