Using An Extensiontelephoneto Receivefax Messages - Panasonic KX-FMC230 Operating Instructions Manual

Using an extensiontelephoneto receivefax
messages
If you have an extension telephone connected to your facsimile unit or on the same line, it is possible to
receive a manual fax message. Using the extension telephone, dial the fax activation code.
You do not have to go to the facsimile unit and press [START/COPY/SET).
Important:
eTo activate this feature, use a touch tone telephone as the extension telephone and enter the fax activation
code FIRMLY.
• The fax activation code is set to "# 9" as a pre-selected setting.
Receiving using an extension telephone
When a call is received, lift the handset of the
extension telephone.
When:
--document reception is required,
--a slow beep is heard, or
--no sound is heard,
enter the fax activation code FIRMLY.
Hang up the handset.
• The facsimile unit is set to receive documents.
I
To the EXT jack
or the same line
Extension telephone
Changing the fax activation code
This code can be from 2 to 4 digits in length using numbers 0 through 9, and the character -X-.
Press {_.
Display:[
SYSTEM SET UP I
2 Press [_, then [] _.
[ AcT CODE I
Press S[S[S[S[S[S[S[S[S[S!ART/COPY/SETJ.
I MODE=ON [''] )
Press _ or Q toselect thedesired se.Jng.
oil this feature is not required, select "OFF".
Press [START/COPY/SET!.
I CODE=>_ 9
Enter the new code number.
PressfSTART/COPY/SET !.
SETUP ITEM [
• 8 Press (_.
Note:
• Some special telephone company services
will require you to press a service access
code. If you subscribe to such services, all or
part of the fax activation code must be
different from the service access code.
• If the fax activation code is set to "0000", this
feature will not work properly.
68