Panasonic KX-FMC230 Operating Instructions Manual page 61

Changing from the FAX ONLY mode to the EXT.TAM mode
Change the AUTO RECEIVE setting from the FAX ONLY mode to the EXT.TAM mode.
Press _.
Display: I
SYSTEM SET UP I
2 Press _}, then _ [_,
Press {.START/COPY/SET}.
I MODE=FAX°nly ["" ]i
4 Press (_ or (_) to select EXT.TAM,
I MODE=EXT" TAM [V" ] 1
oTo return tothe FAX ONLY mode, select
FAXonly.
Press [START/COPY/SET}.
I SETUp ITEM [ ] I
Press {_.
Dial
START/COPY/SET
Using the EXT.TAM mode
To set the facsimile unit and telephone answering machine to receive voice messages and send fax
messages, proceed as follows. '
1
Turn on the answering machine.
olf the answedng machine is not turned on, all
incoming calls will be answered by the facsimile
unit and callers cannot leave messages.
Press IAUTO RECEIVE / on the facsimile unit until
the FAX indicator light will turn on.
oThe display shows the following message.
Display: I EXT.TAM
MODE I
Note:
eEvery time the facsimile unit receives a document, a
silent pause or fax tone may be recorded on the
answering machine.
oSet the receive mode of the facsimile unit to the TEL
mode under the following conditions:
--when you wish to set the number of rings on the
answering machine to more than 5, or
--when you wish to use the auto transfer functions
(transfer, pager alert, etc.) on the answering
machine,
Note that automatic fax sending can not be received
au!omatically in the TEL mode.
The FAX indicator is on.
61